RFID Push start stop system.

Description

1. Remote start from OEM remote control
   While the vehicle is in locked state, press the LOCK button on the OEM (original) remote control 3 times continuously (LOCK-LOCK-LOCK) or press UNLOCK-LOCK-UNLOCK within the remote control range, the engine will start.
2. With RFID card to unlock the doors while the engine is running after remote start
   For most of the car, the OEM remote is not working while the engine is running. Our system has RFID card, the user can unlock the doors while the engine is running after remote start and drive the car directly and there is no need to start the engine again.
3. Remote start from remote control of aftermarket car alarm
   Some aftermarket car alarms have a remote start output which can be used to connect with a negative input of the remote start module to achieve remote start. Our push start system model PS-02 can work together with this kind of car alarm and has the function of remote start with the remote control of the aftermarket car alarm. While the car is in locked state, when our control module receives the pulse of remote start output from the car alarm, the engine will start.
   About the remote start operation of the aftermarket remote control, please refer to the User Manual of the related car alarm.
4. Can work with both gasoline and diesel engines, selectable with Dip Switch.

Highlights

1. Push to start/stop
2. Remote start with 3X Lock or Unlock-Lock-Unlock from OEM (original) remote control
3. With RFID card to unlock the doors while the engine is running after remote start
4. Remote start input (-) for car alarm with remote start output
5. Selectable push to start/remote start engine crank time
6. Reservation for remote start of Manual Transmission vehicles
7. Start time limitation
8. Working with both gasoline and diesel vehicles

What’s in the box?
1 * Car Engine Push Starter Host
1 * Push Start Stop Button
1 * RFID Sensor Ring
2 * RFID Key
1 * Installation Wire
1 * English User Manual